Mistakes To Avoid During A Septic System Installation
Most homeowners prefer septic systems to public sewers. Besides, a septic tank system gives you more control over your waste. But if you invest in a septic system, you must ensure the installation goes well. Don't make mistakes that might affect the efficiency of your system. Some septic system installation mistakes to avoid are as follows.
Installing a Small Septic Tank
Some folks will purchase a small septic tank just because it's cheaper. But do you know the size of your septic must be determined by the size of your household? As you'd expect, a large family will produce more waste than a small family. Therefore, choose a septic tank size that can handle your household's waste. If you install a small tank, you'll have to pump it more often because it will fill up fast.
Failing to Test the Soil
The soil surrounding your septic system is very important. Remember that the septic system relies on the soil to treat the liquid residue. As such, ensure the surrounding soil is permeable. Otherwise, the liquid residue will make its way to the nearby waterways and cause large-scale pollution.
Unfortunately, local government agencies don't take such kinds of pollution lightly. They will fine you heavily for water pollution. Besides, you'll have to redo the septic installation to prevent the problem from recurring.
Wrong Excavation
Once you have identified the area you want the septic tank installed, the excavation process will begin. You should be careful how you excavate the site. For starters, it must have the correct depth and width. You'll have to level the base out to ensure the septic tank sits comfortably at the bottom.
When excavating the site, leave enough space to allow for backfilling and compaction. Finally, the excavation site shouldn't be near your house or trees.
Failing to Choose a Good Location for Your Drainfield
The drain field is equally as important as the septic tank. Remember that the treated water from your septic tank must go to the drain field before being filtered through the soil. As a rule of thumb, the drain field should be set in an area with no structures, trees, or shrubs. Also, ensure the drain field is installed in a low elevation area. This way, wastewater from the septic tank will flow into the leach field with the help of gravity.
Don't make the above mistakes if you must do a DIY septic system installation. You can also contact a professional septic system installation company, such as Richardson Grading And Septic, to do the task.